Buying guides 5 min read
Where to buy mushroom substrate in Australia: a buyer's guide to sterilised substrate bags
Substrate is the cheap half of a grow and the half that decides your yield. Here is how to choose it, how much to buy, and what we put in ours.
If you are working out where to buy mushroom substrate in Australia, start with the species, not the shop. Substrate is the bulk material your colonised grain spawn grows through and fruits from, and the right one depends on what you are growing: oysters are happy on coco coir, while lion's mane, shiitake and king oyster want hardwood. After that come the questions that separate a good bag from a bad one: sterilised or pasteurised, sealed with a filter patch or not, made last week or last year. This guide walks through all of it and finishes with the three substrates we bag by hand in small batches.
Coir-based or hardwood? Pick by species
Coco coir is the standard base for oyster mushrooms. On its own it is low in nutrition, which is why it is mixed with vermiculite for water-holding and with something richer for food. It is forgiving, holds moisture through a hot Australian summer and is hard to get wrong. Hardwood is a different job. Wood-loving species need lignin and cellulose to eat, so lion's mane, shiitake, king oyster, reishi and turkey tail all want a hardwood pellet based substrate, usually supplemented with bran. Put lion's mane on plain coir and you get a thin, disappointing crop. The substrate guide goes through every species we sell for; the short version is below.
- Blue, pink and pearl oyster: coir-based (CVA or CVWA), or hardwood if you have it
- King oyster: hardwood for the best results; fruits on coir-based but lighter
- Lion's mane, shiitake, reishi, turkey tail: hardwood only
Sterilised vs pasteurised substrate
Pasteurising heats substrate to 60 to 80°C for an hour or two. It kills most competitors but leaves bacterial endospores and some mould spores alive, and it relies on the mycelium out-running whatever survived. That works for a plain coir and vermiculite mix with a strong spawn ratio, because there is little in it for contaminants to eat. It does not work for a nutritious substrate. Anything with bran, castings or minerals in it is as attractive to mould as it is to mycelium, and it must be sterilised: 121°C under pressure, a full cycle, then kept sealed until the spawn goes in. Every substrate we bag is sterilised, including the coir blends, because once you add nutrition, sterilised is the only safe answer. Buying sterilised substrate bags in Australia costs a little more than a brick of coir from the hardware shop; it also removes the single biggest cause of lost tubs.
What a filter-patch bag is, and why you want one
A filter-patch bag is a heat-rated grow bag with a small square of 0.2 micron filter material welded into one side. Air passes through so the mycelium can breathe; spores and bacteria do not. The bag goes through the autoclave sealed, so what comes out is sterile and stays sterile until you open it in a clean space to add spawn. Substrate sold loose in a bucket or a zip bag has been open to the air since it was made. If a supplier cannot tell you the bag has a filter patch and was sealed before sterilising, assume it was not.
How much substrate you need
The rule is a spawn ratio of 1:2 to 1:4, spawn to substrate by weight. A 1 kg bag of colonised grain carries 2 to 4 kg of substrate; a 2 kg bag carries 4 to 8 kg. Richer ratios colonise faster and out-run contamination, which is why we tell first-time growers to stay near 1:2. For a tub, aim for a bed 7 to 10 cm deep. The grow builder on the home page does the arithmetic: give it your tub size and it picks the bag sizes of grain and substrate to match. If you are buying bulk substrate in Australia for several tubs, order by the kilograms you need rather than a bag count that looks tidy; the maths is in grain spawn to substrate ratio.
Why fresh, small-batch bags matter
Sterilised substrate is stable but not immortal. A bag made months ago has been slowly losing moisture through the patch, and if the cycle missed anything, that something has had months to grow. Mass-produced bags that sit in a warehouse are also the ones most likely to arrive with a crushed patch or a pinhole from stacking. We make ours by hand in small batches and ship them within days, so what arrives is the bag we would use ourselves.
Where to buy mushroom substrate in Australia: our three substrates
We bag three substrates. Each is sterilised, each is sealed with a filter patch, and each is made fresh.
- Premium CVA
- Coco coir, vermiculite and minerals, a recipe we have refined over years for oysters and anything else that likes coir. Our standard tub substrate. See Premium CVA substrate and the write-up in coco coir mushroom substrate.
- CVWA
- Coir, vermiculite, worm castings and Azomite. Manure-free, with the castings adding nutrition for heavier flushes. See CVWA substrate.
- Wood Lovers Substrate
- Hardwood pellet based, for lion's mane, shiitake, king oyster and reishi. The hardwood block without the mess of making one. See Wood Lovers substrate and hardwood pellet substrate.
Combos and all-in-ones
If you are buying spawn and substrate together, the grain and substrate combos pair a bag of sterilised grain with a matching bag of substrate at the right ratio, so you do not have to work it out. If you would rather skip the mixing altogether, an all-in-one grow bag has the grain already layered under the substrate with an injection port on top. Either way the substrate inside is the same CVA, CVWA or Wood Lovers you can buy on its own.
Questions people ask
Can I buy mushroom substrate online in Australia and have it shipped to any state?
Yes. We ship tracked Australia-wide by Australia Post, standard or express. Substrate bags are sealed and sterile so they travel well; keep them out of the sun when they arrive.
Is coco coir mushroom substrate enough on its own?
For oysters, a coir and vermiculite mix fruits well, but the richer the mix the heavier the flush. Our CVA adds minerals and CVWA adds worm castings. Wood lovers like lion's mane need hardwood instead.
Do I need to pasteurise or sterilise your substrate again?
No. Every bag is sterilised at 121°C and sealed with a filter patch. Open it only when you are ready to add spawn, in as clean a space as you can manage.
How much substrate do I need for a standard tub?
Keep to a 1:2 to 1:4 spawn ratio and a 7 to 10 cm bed. The grow builder on the home page turns your tub dimensions into bag sizes for both grain and substrate.
Written by the Aus Myco Kingdom crew. Everything here is general growing information for gourmet and medicinal species; your room, your climate and your culture will have the final say.
Related guides
All guidesGrain & spawn 3 min read
Grain spawn to substrate ratio: how much spawn you actually need
More spawn is faster and safer, less spawn is cheaper. Here is where the sweet spot sits for coir tubs and hardwood blocks, and a calculator that does the sums.
Substrates 3 min read
Mushroom substrate guide: coir, hardwood and the right one for every species
Substrate is dinner. Oysters will eat almost anything; lion's mane and shiitake want wood. Match the menu to the species and most problems never happen.
Substrates 3 min read
Coco coir mushroom substrate (CVA): what is in it, who it suits and how to run a tub
Coir is the substrate that made home growing easy: clean, cheap, forgiving and endlessly thirsty. Here is what our CVA blend adds and how to use a bag of it.
