Teks & tutorials 5 min read
Agar to grain transfer tek: moving a clean wedge into a sterilised grain bag
Liquid culture is faster to start. Agar is cleaner. When you have a plate with one vigorous, uncontaminated sector on it, this is how you turn it into a bag of spawn.
An agar to grain transfer is how a clean sector on a plate becomes a bag of spawn. You cut a wedge of colonised agar, drop it onto sterilised grain, seal the bag and let the mycelium walk off the wedge and across the kernels. It starts slower than a syringe of liquid culture, but you know exactly what you are putting in, because you watched it grow on the plate first. We bag sterilised grain in wheat, oats, corn and milo, and pour high nutrition and low nutrition agar plates, so both halves of this tek come from the same bench.
Why agar first
A plate shows you what a syringe hides. Within a week on agar you can see whether a culture is clean, vigorous, and one organism rather than several. You pick the best sector, the fast, bright white, ropey growth, and leave the slow or discoloured bits behind. Grain cannot do that; whatever goes into a bag colonises the whole bag. So agar is where you isolate and clean up, and grain is where you multiply. If you are new to plates, start with agar plates for beginners and come back here when you have a plate worth transferring.
Tools for an agar to grain transfer
- A colonised agar plate with a clean sector, 60 to 90 percent covered
- A scalpel with a fresh blade, or a sterilised transfer blade
- A butane torch for flaming the blade between cuts
- 70% isopropyl alcohol, wipes, nitrile gloves and a mask
- A still air box, because this transfer opens the bag
- A sterilised grain bag and a way to reseal it: impulse sealer, or fold and tape
- A marker for the label
The open bag is the difference from liquid culture: the grain meets air for a minute or two, which is why a still air box matters more here than anywhere else in a beginner's workflow.
Two ways in: open the top seal, or use the port
The standard method opens the bag. Wipe the outside with alcohol, cut straight across the top seal above the filter patch, keep the cut edge pointed away from your face and hands, and drop the wedges in through the opening. Then fold or heat-seal the top so the filter patch sits above the grain, where it can breathe.
The port method keeps the bag sealed. Chop the wedge into pieces small enough to pass through a 16 gauge needle, draw them into a syringe with 5 to 10 ml of sterile water, shake, and inject through the self-healing port like a liquid culture. It is tidier and needs less space, but you cannot count what went in, and the small fragments take a few more days to get going. We open the top, and it is the method the rest of this post follows.
Cutting wedges
Flame the blade until it glows and let it cool for a few seconds. Lift the plate lid only as far as you need, keep it angled over the plate like a roof, and cut a wedge about the size of your little fingernail from the edge of the clean sector, where the growth is youngest and most vigorous. Avoid the centre of the plate and anything within a centimetre of a discoloured patch. Cut three to six wedges, flaming the blade between cuts if it touched anything. Work quickly: a plate open for ten seconds is fine, a plate open for two minutes is a gamble.
How to transfer agar to grain, step by step
- Open the bag
Cut across the top seal above the filter patch. Hold the opening closed with one hand while you work, and open it only to drop a wedge.
- Drop 3 to 6 wedges
Slide each wedge off the blade onto the grain, mycelium side down if you can manage it. Three wedges is enough for a 1kg bag; six for 2kg or a slow species. Spread them across the bag rather than piling them in one spot.
- Reseal
Fold the top over twice and tape it, or run it through an impulse sealer. The filter patch must sit above the grain line, not buried in it, or the bag cannot breathe.
- Settle the wedges
Tilt the bag gently so each wedge is in contact with grain. Do not shake yet; the wedge needs to stay put until the mycelium has jumped off it.
- Label and incubate
Species, date, number of wedges. Then 20 to 26°C, dark, filter patch uncovered.
Incubation and the slower start
A wedge has to grow off the agar and onto the first kernel before anything looks like it is happening. Expect three to five days of nothing, then a white halo around each wedge. From there it behaves like any grain bag: break and shake at 20 to 40 percent, full colonisation in roughly three to five weeks. Count on a week longer than the same species from liquid culture. Loose grains help the wedges make contact, which is why we like oats and wheat for this tek; the kernels settle around the wedge instead of leaving it perched on top.
When agar to grain is worth it
- Cleaning up a culture
- A syringe that grows slow or patchy on grain often has bacteria riding along. One pass across a plate separates the mycelium from the passengers.
- Exotic or slow species
- Lion's mane, shiitake and reishi are easier to judge on a plate than in a bag, and a vigorous sector on agar saves weeks of waiting on a weak bag.
- Spores germinated on agar
- Spores are a mix of genetics. The plate lets you pick one strong sector and carry only that into grain.
For a first grow with a known-good syringe, liquid culture straight into the port is faster and simpler. For everything else, agar first and then grain is what we do ourselves, and because we pour plates and bag grain in small batches, both arrive fresh.
Questions people ask
How many agar wedges do I put in a grain bag?
Three to six. Three for a 1kg bag of a fast species like oyster, six for a 2kg bag or a slow species like lion's mane. More wedges means more starting points and a faster run.
Can I do an agar to grain transfer without opening the bag?
Yes, by chopping the wedge finely, suspending it in 5 to 10 ml of sterile water in a syringe and injecting through the port. It starts a little slower than dropping whole wedges in, but it keeps the bag sealed.
How long does agar to grain take to colonise?
Three to five weeks at 20 to 26°C, usually about a week longer than liquid culture, because the mycelium has to leave the agar before it can start on the grain.
Do I need a still air box for agar to grain?
Yes. The bag is open while you work, so moving air can carry spores straight onto the grain. A clean tub with two arm holes is enough.
Written by the Aus Myco Kingdom crew. Everything here is general growing information for gourmet and medicinal species; your room, your climate and your culture will have the final say.
Related guides
All guidesTeks & tutorials 5 min read
How to inoculate a grain bag with liquid culture: the step-by-step tutorial
A sterilised bag, a syringe, a flame and a steady hand. Here is the whole process, from wiping the bench to a bag that is white through, with the numbers that matter.
Teks & tutorials 5 min read
Grain to grain transfer tek: how to expand one colonised bag into five
One colonised bag is a start. One colonised bag poured into five fresh ones is a season. The grain to grain transfer is the quickest way to multiply spawn, and the quickest way to multiply a mistake.
Lab & agar 3 min read
Agar plates for beginners: isolating a clean mushroom culture
Agar is where luck stops being part of the method. One plate shows you what a culture really is before you spend three weeks finding out in a grain bag.
