Teks & tutorials 5 min read
How to inoculate a grain bag with liquid culture: the step-by-step tutorial
A sterilised bag, a syringe, a flame and a steady hand. Here is the whole process, from wiping the bench to a bag that is white through, with the numbers that matter.
This is the tutorial we send people to when they ask how to inoculate grain bags with liquid culture. It is the easiest route into grain spawn: a sterilised bag with a self-healing injection port, a liquid culture syringe, a few millilitres through the port, and the bag stays sealed until it is white through. Our sterilised grain comes in wheat, oats, corn and milo, every bag autoclaved at 121°C and fitted with a 0.2 micron filter patch and an injection port. We hand-make every batch in small runs, so the bag that lands on your doorstep is fresh and the sterile window is on your side from day one.
What you need
- A sterilised grain bag, 1kg or 2kg, with a self-healing injection port
- A liquid culture syringe of a gourmet species, shaken and ready
- A sterile needle, 16 or 18 gauge, still in its wrapper
- 70% isopropyl alcohol and lint-free wipes or paper towel
- A butane torch or lighter for flaming the needle
- Nitrile gloves, a mask, and a still air box or a clean, fan-free room
- A permanent marker for the label
Prepare the space and the syringe
Contamination gets in on moving air and on hands. Shut the windows, turn off fans and air conditioning, and wait ten minutes so the dust settles. Wipe the bench with 70% alcohol. Wash your hands to the elbow, glove up, and wipe the gloves too. Leave your phone on the other side of the room. A still air box is the cheapest upgrade you can make, but for a port injection a clean, still room is enough. Lay everything out before you start.
Now the syringe. Mycelium settles into clumps, so shake it hard for twenty seconds until the liquid looks evenly cloudy; clumps block the needle. Open the needle wrapper at the hub end, screw the needle on without touching the shaft, and flame it until it glows. Let it cool for ten seconds, or push a drop of culture through it. From here the needle touches nothing but the port.
How to inoculate grain bags, step by step
- Wipe the port
Wipe the self-healing injection port with 70% alcohol and let it flash off. The port is the one place the needle will touch, so it is the one place that has to be clean.
- Inject 2 to 5 ml per kilo
Push the needle through the port and inject 2 to 5 ml per kilo of grain, so 4 to 10 ml for a 2kg bag. Spread it across two or three spots: draw the needle back to the port without pulling it fully out, change the angle, and push in again. Each spot becomes a colony that grows outward.
- Withdraw and leave it sealed
Pull the needle out; the port seals itself. A square of micropore tape over it is optional. Do not open the bag, now or later to look. The port exists so that you never have to.
- Label
Species, strain if you know it, date and millilitres used. In three weeks you will not remember which bag was which.
Incubation: 20 to 26°C, dark, filter patch uncovered
Put the bag somewhere that holds 20 to 26°C. A cupboard, a grow tent or the top of the fridge all work. Keep it dark or dim; light does not stop mycelium, but it nudges it to fruit. The filter patch is how the bag breathes, so leave it uncovered: no stacking bags on each other's patches, no wrapping in plastic, no cramming into a drawer. A heat mat goes on the wall of the space, not under the bag, which cooks the bottom kernels.
What to expect day by day
- Days 1 to 3
- Nothing you can see, perhaps a faint haze around each injection spot. Resist squeezing the bag; the first strands are fragile and you will break them.
- Days 4 to 7
- White fuzz spreading outward from each spot. Healthy mycelium is bright white, cottony or in fine strands. Green, black, pink or a wet grey patch is trouble, and so is a sour smell.
- Days 7 to 14
- The spots have grown into patches and a quarter to a third of the bag is white. This is the window to break and shake.
- Days 14 to 21
- After the shake the whole bag whitens quickly, because every colonised kernel is now a new starting point. Milo and oats are the fastest of our four grains, corn the slowest.
- Days 21 to 28
- Solid white through, with a clean, sweet smell. Use it within a week or two of full colonisation, while it is at its most vigorous.
When to break and shake
At 20 to 40 percent colonised, break the bag up. Hold it by the top, work the grain apart from the outside with your fingers until no lumps remain, then shake it so the white kernels are spread through the uncolonised ones. Mind the filter patch; do not crush or fold it. Shake once. Shaking again later only breaks strands that have already done their job. Milo tolerates the shake best because its hard kernels do not split; oats loosen easiest; corn and wheat need firmer hands.
Common mistakes
- Too much liquid culture
- More than 5 ml per kilo leaves free water at the bottom of the bag. Wet kernels drown and bacteria move in, and the first sign is a sour smell. Measure, do not guess.
- Cold rooms
- Below 18°C the run crawls and the contaminants that like cool conditions get a head start. Southern winters need a warm cupboard or a mat on the wall.
- Squeezing early
- A bag squeezed in the first week stalls, because the early strands are broken before they have a network to grow from.
- Opening the bag
- Every opening is a contamination event. If you need to look, look through the plastic with a torch.
If something does go wrong, our contamination guide decodes each colour and smell, and sterilised grain bags explained covers how the bag itself is made.
Questions people ask
How much liquid culture do I inject into a grain bag?
2 to 5 ml per kilo of grain, so 2 to 5 ml for a 1kg bag and 4 to 10 ml for a 2kg bag, split across two or three spots. More than that wets the grain and invites bacteria.
Do I need to open the bag at any point?
No. Inject through the self-healing port, incubate sealed, break and shake through the plastic, and open it only when you are spawning to substrate.
How long does a grain bag take to colonise from liquid culture?
Two to four weeks at 20 to 26°C, depending on the species and the grain. Milo and oats are fastest, corn is slowest, and lion's mane is slower than oysters on any grain.
Can I inject through the filter patch instead of the port?
No. The patch is the bag's lungs, and a hole in it lets contaminants straight in. Use the port.
Written by the Aus Myco Kingdom crew. Everything here is general growing information for gourmet and medicinal species; your room, your climate and your culture will have the final say.
Related guides
All guidesTeks & tutorials 5 min read
Agar to grain transfer tek: moving a clean wedge into a sterilised grain bag
Liquid culture is faster to start. Agar is cleaner. When you have a plate with one vigorous, uncontaminated sector on it, this is how you turn it into a bag of spawn.
Grain & spawn 3 min read
Sterilised grain bags explained: what they are, how to use them and how to keep them clean
The injection port, the filter patch, the 2 to 5 ml, the three weeks. Everything a grain bag does and everything you do to it.
Troubleshooting 4 min read
Mushroom contamination guide: green mould, wet spot, cobweb and what to do about each
Every grower meets these. The ones who keep growing are the ones who learned to recognise them on sight and throw the bag out without a second thought.
